Performance data sheet – Haws 2000S User Manual

Page 8

3/14

Model 2000S

Page 8 of 8

PERFORMANCE DATA SHEET

IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit with
your actual water treatment needs. It is recommended that, before purchasing a water treatment unit,
you have your water supply tested to determine your actual water treatment needs.

Substance Influent

Challenge

Concentration

Reduction
Requirement

Maximum Permissible
Product Water
Concentration

Average Percent
Reduction

Chlorine,
Taste
and Odor

2.0 mg/L ± 10%

≥50% N/A

96.6%

Lead

0.15 mg/L ± 10%

N/A

0.010 mg/L

99%

Cyst Minimum

50,000/L

99.95% N/A

99.99%

This system has been tested according to NSF/ANSI 42/53 for the reduction of the substances listed.
The concentration of the indicated substances in water entering the system was reduced to a
concentration less than or equal to the permissible limit for water leaving the system, as specified in
NSF/ANSI 42/53.

Testing was performed under standard laboratory conditions. The contaminants or other substances
removed or reduced by this water treatment device are not necessarily in all users’ water. Filter
performance may vary based on local water conditions.

HAWS

and other trademarks used

in these materials are the exclusive property of Haws Corporation.