Haws 2000S User Manual
Page 5
3/14
Model 2000S
Page 5 of 8
Maintenance
Filter Replacement
For filter replacements, please contact Haws customer service at 1-888-909-4297, or visit
www.BritaHydrationStation.com
.
It is recommended that at least one filter replacement is on hand
for immediate replacement purposes.
Maintenance personnel can determine filter life as outlined on page 4. The filter should be
changed if the filter LED begins to blink yellow or red, if 1 year has elapsed since the filter was
installed, or if the water output begins to decrease.
To open the unit, slide the supplied hex key (or a long, small slotted screwdriver) into the notch
in the left-hand side of the hinged upper panel and press the key firmly in that same direction.
This will disengage the internal spring latch. Simultaneously pull open the hinged panel.
Take care not to damage the stainless steel panel or the spring latch in this process.
NOTE: Opening the hinged panel cuts the power to the sensor and the solenoid valve,
preventing accidental activation.
WARNING:
1. Make certain power is disconnected before servicing to reduce the risk of electrical shock.
2. Do not touch any circuit board for any reason.
CAUTION: Do not use an abrasive cloth, brush, polishing compound, or abrasive cleaner to
clean any part of the unit.