Haws 2000S - Manual (Page 3)

3/14 Model 2000S Page 3 of 8
Maintenance Label
 When installation of the Brita ® Hydration Station ® is complete, obtain a phone number for the
sales representative that sold you the unit. Write this number into the maintenance label
located in the lower right-hand corner of the front of the unit (see below) and use for maintenance
and troubleshooting questions.
 If any issues or questions arise that cannot be addressed by this Owner’s Manual, refer to this
label, which also contains the Haws ® (888) 909-4297 customer service phone number and a
serial number for tracking.
General Operation
 Approach the Brita ® Hydration Station ® with a bottle (or other multi-use water
container). Note the start/stop activation label (seen to right) at the center of
the unit – in & up to activate; down & out to deactivate.
 Place the bottle in the opening and move upward to the sensor (see below).
 When the sensor detects the bottle, a blue light will activate to help position
the bottle under the nozzle. After a slight delay, water will dispense.
 When the bottle is filled, lower it from the sensor to stop the water flow.
o
There is a 30 second shut-off feature to prevent needless dispensing.