Haws 2000S - Manual (Page 4)

3/14 Model 2000S Page 4 of 8
General Operation (continued)
 As water dispenses, the
LED light to the far right of
the sensor (see right) will
flash green several times,
indicating that the filter is
working properly. This
same LED will change to a
blinking yellow when filter
life reaches 10% remaining
(filter change
recommended).
 When the filter has
reached end of life, the
indicator LED will flash red
and the unit will not
dispense
water until the
filter is replaced.
Auto Purge & Periods of Inactivity
 The Brita ® Hydration Station ® is designed to purge itself after every 24 hours of non-use. This
effectively removes the standing water from the system and introduces new water in an effort to
prevent the growth of bacteria.
 If there is an atypically lengthy period of time during which the Brita® Hydration Station ® is not in
use, it is advisable that the filter cartridge be replaced when the system comes back on line.
Water Quality
 The Brita ® Hydration Station ® is not intended to purify water. Do not use this system with water
that is microbiologically unsafe or of unknown quality without adequate disinfection before or after
the system. Individuals requiring water of special microbiological purity should follow the advice
of their doctor or local health officials regarding the use and consumption of their tap water.