Maxsa Innovations Solar-Powered 50 LED Motion-Activated Outdoor Security Floodlight - Manual (Page 2)

2
carefully remove and identify all the parts from their protective packaging and lay
them out in front of you.
IncLuDED pArtS:
once you have identified all parts, connect
the solar panel to your solar security light
by plugging the 15 foot cord into the cord
attached to the front of the solar security
light. turn and twist the cords while pressing
firmly together until they are attached tightly.
adjustment dials are located on the underside of the motion sensor. Move the
motion sensor to allow for easier access to the controls. Move sensor back into
position upon completion.