Pure Chronos CD - Manual (Page 9)

7
Setting alarms
How to set an alarm
1. Press the Alarm button then select Alarm 1, 2, 3 or 4 with +/− and Select. The time,
repeat days and on/off status are displayed on the top line.
2. Select ‘Set alarm’ and choose ‘On’ to turn the alarm on.
3. Select ‘Set time’ to set the time you want the alarm to sound. Adjust the hours using +/−
and press Select to confirm, then adjust the minutes and press Select to confirm.
4. Select ‘Set days’. Choose when you want the alarm to repeat (press +/− to browse
through the options and press Select to confirm):
Daily Every day
Weekday Monday to Friday, every week
Weekend Every weekend
Saturday Every Saturday
Sunday Every Sunday
Once The alarm will sound at the time you have selected and not repeat
5. Select ‘Set Mode’ to choose the type of alarm you want: Radio, Tone or CD.
6. If you select ‘Radio’, now choose a radio station for the alarm from the preset list using +/− to
choose and Select to confirm. If you select ‘Last used’ the alarm will tune to the DAB or FM
station you most recently listened to. (To learn how to set presets, see page 6.)
7. Select ‘Set volume’ and adjust the volume level for the alarm from 1 (very quiet) to 16 (very
loud) using the +/− buttons and Select to confirm.
That’s it! You can see which alarms are currently switched on by looking at the
numbered alarm clock icons on the screen, in either active or standby mode.
)TIZU &)3PX[h>UU
0[Pa\
;MTMK\
>UU
>]
&)"
&)"BTc\X]b Œ
;MTMK\
;MTMK\
An alarm you’ve already set can be turned off by selecting ‘Set Alarm >
Off’. You can reactivate an alarm by selecting ‘On’.