Pure Chronos CD - Manual (Page 14)

12
Hints and Tips
(<>) Secondary DAB services
Secondary services accompany some stations, providing extra information or alternative content
and may only be broadcast at certain times. If a station has secondary services available, the
station shows ‘>>’ next to its name in the station list and the secondary service appears next to
the station in the list. A secondary service has a ‘<<’ before its name in the station list.
(?) Inactive or unavailable DAB stations
Inactive or unavailable stations are those which appear on the station list but are not currently
available. Inactive stations have a ‘?’ before their name on the station list. If you select a station
which has this symbol, your radio tries to tune in or returns to the previous station.
Display says ‘No stations available’
Check that your aerial is fully extended. Use Autotune to search for stations. Try adjusting your
aerial or radio position.
The screen is very dark
Check the Display settings. Check that the light sensor is not obstructed if Auto dimming is selected.
Resetting your radio
Resetting your radio removes all presets, stored stations and favourite station settings and resets
all options to defaults. To reset:
1. Press and hold the Menu button for three seconds.
2. Press Select to confirm the reset or press no buttons to cancel the reset.
Technical Specifications
DAB Fully compliant with ETS 300 401 and capable of decoding all DAB
transmission modes 1-4 up to and including 192 kb/sec.
CD player Compatible with CD, CDRW, MP3, WMA
Speakers Two 3 inch x 1.5 inch oval, 8 ohm impedance.
Frequency range (MHz) DAB Band III 174-240, DAB L-Band 1452-1491, FM 87.5-108
Input connectors 9V DC power adapter socket (230 V adapter supplied)
3.5 mm Aux in for connection of auxiliary devices.
Output connectors 3.5 mm socket for headphones.
Remote control Infrared remote control.
Aerial Wire aerial attached.
Mains power supply 100-240 V AC to 9V (1.5 A) DC external power adapter (supplied).
Power consumption In standby: 0.71W. In operation: 2.5W
Approvals CE marked. Compliant with the EMC and Low Voltage Directives
(2004/108/EC and 2006/95/EC).
Dimensions 195 mm (width) x 125 mm (height) x 185 mm (depth).
Components are selected to
minimise environmental impact