Pure BUG Too - Manual (Page 24)

22
Select one of the following options:
DRC 0 DRC is switched off. Any DRC level broadcast will be ignored. This is the
default setting.
DRC ½ DRC level is set to ½ that sent with the broadcast.
DRC 1 Applies the DRC level as sent with the broadcast.
Signal strength
Display the signal strength meter which indicates the signal strength of the current
station. The marker indicates the minimum required level for reception and the filled
blocks indicate the current level. You can use this meter to help adjust your aerial to
try to improve reception.
Signal strength meter