Pure BUG Too - Manual (Page 15)

13
Changing what’s shown on screen
Show and Tell time. Bug TOO has 5 DAB info modes so you can change what you see
on screen. Press the Info button and repeat to choose between the 5 info modes. Some
of the modes have more than one option, shown by an arrow at the bottom right of the
screen. Push the shortcut button next to the arrow to choose between the options for
that mode (shown below with arrows).
1 Scrolling text Scrolling text broadcast by some stations.
2 Multiplex Name of the multiplex the current station belongs to. Multiplexes
are groups of stations broadcast by a single operator.
Date Day and date broadcast by the multiplex.
Channel DAB channel and frequency of the station you are listening to.
Mode Stereo or Mono indicator and data rate at which the station is
being transmitted. This rate is set by the stations to suit the type
of material being transmitted. High rates generally mean higher
quality.
Quality Signal quality for the station you are tuned to. As a guide, values
from 85 to 100 indicate good reception, 70 to 84 so-so reception
and 0 to 69 poor reception.
Content Description of the content broadcast by the station.
3 Clock Full-screen clock showing hours and minutes.
Clock 2 Full-screen clock showing hours, minutes and seconds.
Clock 3 Date and time.
4 Presets 1-5 DAB presets 1-5 for quick access using the six shortcut buttons.
6-10 DAB presets 6-10 for quick access using the six shortcut buttons.
5 Bug TOO eyes Animated Bug TOO eyes, just for fun.
Scrolling text
Multiplex
Clock
Presets
Bug TOO eyes