Pure Tempus-1S - Manual (Page 9)

7
EN
4. Push the Tune dial to select ‘Set days’. Choose when you want the alarm to repeat (turn the
Tune dial to browse through the options and push to select).
Daily Every day.
Weekday Monday – Friday, every week.
Weekend Every weekend
Saturday Every Saturday
Sunday Every Sunday
Once only The alarm will sound at the time you have selected and not repeat.
5. Push the Tune dial to select ‘Set Mode’ and choose the type of alarm you want to sound:
DAB, FM, or Tone or Natural Sounds. If you select ‘Tone’, there are no further options.
6. Push the Tune dial to select ‘Select station’ (or ‘Select sound’ for a natural sound alarm) and
choose a radio station or natural sound for the alarm.
For DAB alarms
Select a DAB station from the station list using the Tune dial.
For FM alarms
Choose between ‘Last tuned’ or an FM preset station. If you select ‘Last tuned’ the alarm will
tune to the last FM station you listen to before the alarm sounds.
For a natural sound alarm
Select a natural sound from the list using the Tune dial.
7. If you have selected DAB, FM or a natural sound push the Tune dial to select ‘Alarm volume’
and adjust the volume level for the alarm from 1 (very quiet) to 32 (very loud).
That’s it! You can see which alarms are currently switched on by pressing the Alarm button and
scrolling through the alarms. You can also check the next three alarms due to sound in ‘Full
screen time’ display (set the ‘Info display’ option to ‘Full screen time’ or tap the SnoozeHandle).
07 set volume
Use volume control
22:45
08:30
16:30
08:30
The next alarm will
sound at 08:30 am
DAB
Setting alarms
If you want to set
a ‘one-off’ alarm
choose ‘Once only’.
Tip
Tune
Tune
Tune
10
Alarms are ordered by
when they will next sound.
An outlined bell shows an
alarm that will not sound
within the next 24 hours.
Tip
08:30 set mins
07:00
Tune Tune