Pure Tempus-1S - Manual (Page 10)

8
Waking and snoozing
Cancelling an alarm
Snoozing an alarm
To temporarily silence a sounding alarm tap the SnoozeHandle. The alarm will stop and the radio
will return to standby before sounding the alarm again after 8 minutes have elapsed.
Cancelling an alarm that you have snoozed
To cancel a snoozed alarm and leave the radio in standby, press Alarm or push the Tune dial.
Alternatively, press Standby to turn the radio on and cancel the snoozed alarm.
Changing the alarm snooze time
Press Alarm, scroll to ‘Snooze time’ and push the Tune dial to select. Turn the Tune dial to adjust
the snooze time between 5 and 59 minutes then push the Tune dial to confi rm.
Other functions of the SnoozeHandle®
Display the full screen clock or time and date
When the radio is switched on, tap the SnoozeHandle once to display the full screen clock for 3
seconds. (If your information display is already set to ‘Full screen time’ (see page 5) tapping the
SnoozeHandle will temporarily display the current station with the time and date.)
Illuminate the clock at night
When in standby or during a snoozed alarm tap the SnoozeHandle to brighten the screen to your
current active brightness setting for three seconds (see page 12). Alternatively, touch and hold
the SnoozeHandle to brighten the screen to the maximum available brightness setting.
Cancel an alarm > Snooze an alarm > Adjust the snooze time > Use the SnoozeHandle ™
Alarm
Alarm
Standby
Tune
Tune
or
or
or
8
08:38
08:45 Alarm cancelled
(Alarm > Snooze time)
23:59 08:30
Waking and snoozing
08:30 08:30
08:30 08:30
*
* *