Pure Tempus-1S - Manual (Page 7)

5
EN
To listen to a natural sound
Press the Source button until ‘Natural Sounds’ appears on the display. When listening, turn the
Tune dial to browse through the 5 available sounds and push the Tune dial in to select one.
Changing the information shown on screen
You can change the information that is displayed on screen. Press the Menu button, turn the
Tune dial to scroll to ‘Info display’ and push in to select. Turn the Tune dial to browse through the
available information display options for the current audio source and push in to select. Choose
between:
Scrolling text Information broadcast by most DAB stations and some FM (RDS) stations.
Full screen time Displays the time and alarm indicators.
Time and date Displays the time and date updated regularly by the DAB or FM (RDS) signal.
Programme type Describes the content of the current DAB or FM (RDS) station, e.g., Pop Music.
Multiplex name The DAB multiplex in which the current station is broadcast, e.g. Digital1.
Multiplex info The channel of the current DAB Multiplex, e.g., 12B.
Bit rate The bit rate (audio compression level) of the current DAB station and a
stereo/mono indicator.
Signal quality DAB signal quality: 85 to 100 good; 70 to 84 OK; 0 to 69 poor.
Signal strength Displays a meter illustrating the strength of the DAB or FM signal.
Stereo mode Indicates whether the current FM broadcast is in stereo.
Using textSCAN™ to pause and control scrolling text
1. When ‘Scrolling text’ information is displayed in either DAB or FM (RDS), press the Tune dial
to pause the scrolling text.
2. Turn the Tune dial right or left to scroll forwards and backwards through the current scrolling
text. To exit textSCAN press the Tune dial again.
( Menu > Info display)
08:38
NAT
Tune
Tune Tune
Tune
Tune
Using your TEMPUS-1S
Small waves
Bird calls
Playing: Race For Th
BBC Radio 6Music
Now playing: Race For T
BBC Radio 6Music
Prize by Flaming Lips
BBC Radio 6Music
> Exit