Help and specifications, Secondary and inactive dab stations, Hints and tips – Pure Tempus-1S User Manual
Page 16: Technical specifications
14
Help and Specifications
Secondary and inactive DAB stations
(<>>) Secondary DAB services
Secondary services accompany some stations, providing extra information or alternative content
and may only be broadcast at certain times. If a station has secondary services available, the
station shows ‘>>’ next to its name in the station list and the secondary service appears next to
the station in the list. A secondary service has a ‘<<’ before its name in the station list.
(?) Inactive or unavailable DAB stations
Inactive or unavailable stations appear on the station list preceded by ‘?’ and cannot be tuned
to. A station may be inactive or unavailable because the station is not broadcasting at the current
time (check with the station) or has stopped broadcasting altogether. Also, you may not have a
strong enough signal to receive the multiplex on which the station is broadcast.
Hints and Tips
Display says ‘No stations available’
Try adjusting your aerial or radio position and use Autotune (page 11) to search for DAB stations.
The screen is very dark
Check that the light sensor is not obstructed.
Receiving new DAB stations that have started broadcasting
Use Autotune (page 11) to scan for new stations and add any new DAB services to the station list.
Resetting your radio
Resetting your radio removes all presets and stored stations and resets all options to defaults.
1. Press and hold the Menu button for three seconds.
2. Push the Tune dial within 3 seconds to confi rm the reset or the reset will cancel.
Technical Specifications
General
Stereo digital radio (stereo output requires optional auxiliary speaker,
headphones or external amplifi er) with full Band III and FM reception. ETS 300
410 compliant and capable of decoding all DAB transmission modes 1-4 up to
and including 256 kbps. Supports FM RDS and RadioText.
Frequency ranges DAB Band III 174–240 MHz, FM 87.5–108 MHz.
Speaker
Full-range 3" drive unit.
Inputs
6V DC power adaptor socket (230V supplied). 3.5mm Line-in for auxiliary
devices. USB (B type) for product upgrades.
Outputs
3.5mm headphone, 3.5mm line out (analogue), 3.5mm auxiliary speaker
output.
Presets
30 DAB and FM presets in a combined list.
Display
High contrast yellow-on-black graphical 128 x 22 auto-dimming OLED display.
Power supply
230V AC to 6V DC external power adapter.
Power consumption 0.9W in standby; 2.48W in operation.
Approvals
CE marked. Compliant with the EMC and Low Voltage Directives (89/336/EEC
and 73/23/EEC).
Dimensions (mm) 175 high x 210 wide x 110 deep.
Aerial:
Captive telescopic aerial.
Components are selected to
minimise environmental impact.