Pure Tempus-1S - Manual (Page 4)

2
Star t
Quick set up > Controls at a glance > Rear connectors
Detach the aerial from the clip on the rear of the radio and fully extend it (steps A & B).
Insert the jack of the supplied mains adapter into the socket on the rear of the radio (C).
Plug the mains adapter into the mains supply (step D) and press the Standby button.
When you see the message ‘Enable energy saving’ push the Tune dial.
Select ‘On’ to switch on energy saving mode (push the Tune dial).
When energy saving mode is switched on, the radio uses less power in standby because
it does not collect and store Intellitext messages in standby. It still collects and stores
Intellitext messages while the radio is switched on.
With energy saving mode switched on, the power consumption of TEMPUS-1S in standby is
less than 1 Watt.
For more information: Intellitext > page 10 Energy saving mode > page 13
Wait for TEMPUS-1S to complete an Autotune for all available DAB stations (this takes
about a minute). When the Autotune is complete, a station will be selected.
EcoPlus
B
A
Stereo Out
Aerial
Aux In USB Aux Speaker
C
Aerial
Stereo Out Aux In USB Aux Speaker
6V DC
D
Quick set up
saving?
Enable energy
Tune Tune
Energy saving
On
PURE TEMPUS-1S
1
Talking to the people wh
BBC Radio 2 Now tuning...
Star t
Standby