Outback Power Systems EnergyCell RE Battery Owners Manual - Manual (Page 5)

900-0127-01-00 Rev D 5
EnergyCell Batteries
Welcome to OutBack Power Systems
Thank you for purchasing the OutBack EnergyCell battery. EnergyCell is a series of absorbed glass-mat (AGM)
batteries with a valve-regulated lead-acid (VRLA) design. They are designed to provide long, reliable service with
minimal maintenance. Several versions are available, including front-terminal and top-terminal designs. All
have high recharge efficiency and a compact footprint for higher energy density. All have a thermally welded
case-to-cover bond to eliminate leakage, all are 100% recyclable, and all are UL-recognized components.
EnergyCell GH Front Terminal
The EnergyCell GH (Grid/Hybrid) Series uses pure lead plates. It is intended to receive continuous float charging
under normal conditions when utility power is present.
 Intended for use with Grid/Hybrid™ systems, particularly grid-interactive or grid-backup (float service) applications
with occasional interruptions but minimal cycling
 Pure lead plates for long float service life in battery backup applications
 Extended shelf life
Figure 1 EnergyCell GH Front Terminal Battery
4.9” (12.6 cm) 22.1” (56.1 cm)
11.1”
(28.3 cm)
EnergyCell
200GH
12.4”
(31.6 cm)
EnergyCell
220GH