Night Owl PRO-1681TB-2DMA user manual - Manual (Page 52)

52
Chapter 15: Advanced Menu
15.1.3 Camera Block Menu
The Camera Block Menu allows you to configure the settings on your
DVR for instances when your camera may be blocked or covered. To
access the Camera Block Menu, select the Advanced button, select
Alarm from the list on the left side of the screen, and then select
Camera Block.
•
CH: Indicates the channel that you will be configuring.
•
Enable: Allows you to activate the alarm that indicates that the
camera is being blocked or covered.
•
Sensitivity: Indicates the level of sensitivity of the camera. The
lower the sensitivity, the more motion will be required to begin
recording.
•
Schedule: Select settings to open a new window that will
display when the DVR is scheduled to record alarms.
•
Trigger: Select Settings to open a new window that will allow you
to generate different responses by the DVR when alarms have
been detected. (Refer to Chapter 15.1.1.3.)
•
Copy CH: Allows you to configure the settings for one channel
and copy them to another channel.
•
To CH: Allows you to choose the channel that you would like to
copy the configured settings to.