2010 - current driver side rear brace (continued) – Dee Zee FX12358 User Manual

Page 16

Text mode
Original mode

2010 - Current Driver Side Rear Brace (continued)

Put the 8mm bolt [X] through the 8mm washer [Y] and a bent spacer [W], then put the bolt through
the slot in the brace, and through another bent spacer [W] on the top of the brace. Thread the 8mm
bolt into the weld nut on the sub-floor support.

Tighten the factory bolt using an 18mm socket. Tighten the 8mm bolt using a 13mm wrench or socket.

FX 12958

14 OF 17

6/1/2011