Dee Zee FX12358 - Manual (Page 13)

2007 - 2010 Driver Side Rear Brace (continued)
Place the support bracket [G] into the sub-box support. Attach using a 1/4 x 1 1/4" hex head bolt [Q]
and 1/4" fender washer [R] through the sub-floor support into the support bracket.
Attached the mounting bracket [E] using the previously removed factory bolt
and a 1/4 x 1 1/4" hex head bolt [Q] and a 1/4" fender washer [R].
Tighten the factory bolt using an 18mm socket. Tighten the 1/4" bolts using a 7/16" wrench or socket.
FX 12958 11 OF 17 6/1/2011