Dee Zee DZ1361 User Manual
Page 8
Place the side box board on the angle braces. Align the side box board with the cab board.
The board will need to be rotated into position.
Adjust the angle braces as needed to align the step surface of the side box board with the
step surface of the cab board. Tighten the angle braces in place using a 7/16" wrench and socket.
4
Locate and remove the bolt from the fender well using a torx drive.
DO NOT DISCARD. This bolt will be used again to attach the mud flap.
5
DZ 1361
6 OF 9
5/23/2011
See also other documents in the category Dee Zee For the car:
- DZ370183 (4 pages)
- DZ370203 (3 pages)
- DZ370233 (2 pages)
- DZ370313 (3 pages)
- DZ370353 (5 pages)
- DZ370393 (4 pages)
- DZ370693 (3 pages)
- DZ371033 (4 pages)
- DZ371193 (2 pages)
- DZ371213 (4 pages)
- DZ371233 (3 pages)
- DZ371243 (3 pages)
- DZ371253 (3 pages)
- DZ371263 (4 pages)
- DZ371293 (2 pages)
- DZ372663 (4 pages)
- DZ372833 (6 pages)
- DZ371273 (2 pages)
- DZ370113 (4 pages)
- DZ370303 (4 pages)
- DZ370503 (6 pages)
- DZ370583 (4 pages)
- DZ370593 (4 pages)
- DZ370643 (4 pages)
- DZ370783 (6 pages)
- DZ371513 (5 pages)
- DZ371523 (6 pages)
- DZ371533 (4 pages)
- DZ371643 (4 pages)
- DZ371953 (3 pages)
- DZ372213 (4 pages)
- DZ372233 (4 pages)
- DZ372243 (5 pages)
- DZ372253 (4 pages)
- DZ372293 (2 pages)
- DZ372333 (5 pages)
- DZ372693 (5 pages)
- DZ371823 (4 pages)
- DZ370403 (4 pages)
- DZ370343 (4 pages)
- DZ372513 (3 pages)
- DZ372523 (4 pages)
- DZ372533 (4 pages)
- DZ370793 (5 pages)
- DZ370211 (3 pages)