Dee Zee FX31930 - Manual (Page 8)

When the brace is put up to the vehicle mounting location, the threaded plate
must go into the large slot above the nutserts previously installed.
Thread 2 of the 8mm x 25mm bolts [H] through the slots in the braces into the nutserts.
7
Thread 2 of the 8mm x 25mm bolts [H] through the slots in the braces into the nutserts.
Only engage the bolts a few threads into the nutserts.
Do NOT tighten at this time.
Repeat this step at the other two brace mounting locations.
FX 31927 6 OF 10 12/16/2011