Dee Zee FX31930 User Manual
Page 11
Align the board with the vehicle and make sure that the mud flap is up against the wheel well.
Once the board location is set, use a 7/16" socket/wrench to tighten the nuts attaching the
board to the brace.
11
Align the flap with the wheel well and
drill three 1/8" holes through the mudflap
and the sheet metal of the inner fender well.
On the bottom of the board drill a 1/8"
hole through the end cap into the board.
12
FX 31927
9 OF 10
12/16/2011