Dee Zee DZ16336 - Manual (Page 18)

Attach the support brace to the main brace using two of the 8mm x 20 mm bolts [L] and two of the 8mm
flange nut [H].
Do not tighten at this time. Repeat the support bracket installation for the other mounting locations.
Using a 13mm wrench/socket, tighten the bolts that attach the brace to the vehicle. Tighten the top bolt first.
It mat still be necessary to push up on the brace to get this bolt completely tight.
After the bolt with the threaded plate is tightened, tighten the remaining two 8mm bolts.
Using a 7/16" wrench/socket, tighten the carriage bolts attaching the support bracket to the vehicle.
Using a 13mm wrench/socket, tighten the bolts that attach the support bracket to the brace.
Repeat this step for all brace locations.
8
6
7 of 9 7/10/2013