Dee Zee DZ16336 - Manual (Page 10)

Using a 13mm wrench/socket, tighten the bolts that attach the brace to the vehicle. Tighten the top bolt first.
It mat still be necessary to push up on the brace to get this bolt completely tight.
After the bolt with the threaded plate is tightened, tighten the remaining two 8mm bolts.
Using a 7/16" wrench/socket, tighten the carriage bolts attaching the support bracket to the vehicle.
Using a 13mm wrench/socket, tighten the bolts that attach the support bracket to the brace.
Repeat this step for all brace locations.
Once all of the braces have been tighened, adjust the board front/back and in/out to align it
with the vehicle.
11
10
DZ 16336 8 of 9 7/10/2013