Dee Zee DZ16335 - Manual (Page 16)

Thread 2 of the 8mm x 25mm bolts through the slots in the braces into the nutserts.
Only engage the bolts a few threads into the nutserts.
Push up on the brace to put tension on the threaded plate in the large slot. Tighten the bolt
with the threaded plate using a 13mm socket. Air tools are recommended for this.
After the bolt with the threaded plate is tightened, tighten the remaining 8mm bolts.
Repeat this step for all brace locations using the appropriate braces for your cab style.
6
6 of 8 7/10/2013