Apple Multiple Scan 20 Display - Manual (Page 49)

2 Plug the other end of the power cord into the monitor power socket on the back of your
computer.
If your computer doesn’t have a power socket, you need a standard,
detachable, power cord (listed by a relevant safety agency) to plug the monitor
directly into a grounded AC outlet. You can get this cord from an Apple-
authorized dealer or service provider.
3 Connect the PC adapter to the monitor cable.
This adapter is shipped with your monitor.
4 Tighten the thumbscrews on the monitor cable.
You can prevent bad connections and accidental damage by tightening the
thumbscrews.
5 Connect the PC adapter end of the monitor cable to the monitor port on the back of your
computer.
If you installed a video card in your computer, connect the monitor cable
(with the PC adapter attached to it) to the video card’s port. For more
information about installing video cards, see the manual that came with your
computer or video card.
PC adapter
Monitor port on PC-compatible
Monitor cable
43 Notes for IBM PC-Compatible Users