Apple Multiple Scan 20 Display - Manual (Page 34)

Adjusting the shape of the picture
Use these controls Follow these steps
1 Press and hold down the x button on the monitor until the fi
indicator light goes on, then release the button.
2 Press the
x
button again until the
¶
indicator light goes on.
3 Adjust the shape of the picture.
To change the shape of the picture, use the -/+ buttons below the
contrast icon (
O
). Press + to expand the sides of the picture,
changing the shape from concave to convex. Press – to bring in the
sides of the picture, changing the shape from convex to concave.
When the shape of the picture is set properly, all four sides of the
picture are straight and the picture is rectangular.
28 Chapter 3