Apple Multiple Scan 20 Display - Manual (Page 14)

Connecting the monitor to your computer
Follow these steps to connect the monitor to your computer:
IMPORTANT Before you connect any cords or cables, make sure that your
computer is turned off and unplugged.
1 Connect the socket end of the power cord to the power cord receptacle on the back of
the monitor.
2 Plug the other end of the power cord into the power socket on the back of the computer.
If your computer doesn’t have an available power socket, you need a standard,
detachable, power cord (listed by a relevant safety agency) to plug the monitor
directly into a grounded AC outlet. You can get this cord from an Apple-
authorized dealer or service provider.
WARNING This equipment is intended to be electrically grounded. Your
monitor may be equipped with a three-wire grounding plug—a plug that
has a third (grounding) pin. This plug will fit only a grounded AC
outlet. This is a safety feature. If you are unable to insert the plug into
the outlet, contact a licensed electrician to replace the outlet with a
properly grounded outlet. Do not defeat the purpose of the grounding
plug!
8 Chapter 1