Flaming River Power Rack & Pinion Mustang 1979-93 - Manual (Page 3)

79-93 PWR Rack
4/24/2009
2
12)Reassemble shaft kit in car tightening each set screw to 25 ft-lb. using red loctite or another thread
locker and tighten jam nuts ( fig A )
13)Install the outer tie rod ends onto the steering gear and install them into the spindles
14)Install the castle nuts and cotter pins making sure to tighten the nuts to 35-47 ft lbs.
15)Install the 5/16’ pressure line and the 3/8” return line into the rack and tighten fittings.
16)Bleed system following the steps on next page.
Warranty Disclaimer
Flaming River warrants its products to be free from defects in material and workmanship for a period of one (1) year after the date of purchase, except that: All steering columns
are warranted fro a period of three (3) years from the date of purchase. The Big Switch (part number FR1005) is warranted for a period of three (3) years from the date of
purchase provided that it is not mounted steel bracket and provided further that it is adequately protected from environmental conditions. All electrical products other than the Big
Switch are warranted for a period of ninety (90) days from the date of purchase. Flaming River’s warranty liability is limited to the replacement of defective products. Flaming River
is not liable for any labor costs associated with any warranty claim, or for any incidental or consequential damages. Improper installation, abuse, racing, and or modification of the
products void this warranty. No warranty of merchantability or fitness for a particular purpose is made by Flaming River with respect to any of its products.
Warnings and Recommendations: It is the customer’s responsibility to determine the suitability of a given Flaming River product for the customer’s uses. Likewise, it is the
customer’s responsibility to install a Flaming River product. Contact the vehicle manufacturer whenever installing a switch to confirm the appropriateness of using such a switch
and recommended placement of the switch on the vehicle. Use qualified chassis specialist for the installation of all steering related components. Be aware that the installation of
certain Flaming River products may adversely impact a manufacturer’s warranty with respect to certain vehicles and other manufactured goods. Flaming River will repair or
replace any product found to be found defective in material or workmanship. Improper installation, abuse, racing and or modification VOID WARRANTY. Flaming River is not
responsible for any labor costs associated with any warranty.