beautypg.com

Flaming River Comet/Falcon Rack and Pinion Cradle 1960-65 User Manual

Page 9

background image

Installation of Flaming River Rack & Cradle System

Driver Side

Passenger Side

The rack mounting cradle is only shown

here to show the mounting bolts.

1. Install the rack and pinion cradle by sliding it into place between the frame rails. Using the

new hardware, install the three (3) 7/16” bolts on the drivers side using the original holes from the

steering gear box. On the passenger side use the two (2) 3/8” bolts were the idler arm was

mounted. Tighten the 7/16” bolts and nuts to 50-65 ft lbs. and the 3/8” bolts and nuts to

40-45 ft lbs..

Rack & Cradle Shown Installed.

8

Flaming River Industries

1-800-648-8022

081511