Flaming River Comet/Falcon Rack and Pinion Cradle 1960-65 - Manual (Page 5)

2. Remove the horn button by pushing down
on the horn button and turning counter
clockwise. Next remove the steering
wheel retaining nut and then using a
wheel puller remove the steering wheel
from column.
Original System Removal
3. Remove the two nuts from the column
support bracket from under the dash.
Next unplug the electrical connector that
connects the steering column to the
vehicle harness.
4. Remove the upper alignment bushing
that is located at the center of the turn
signal switch. Next remove the column
tube by sliding it off of the column shaft.
1. If your vehicle has a column shift style
steering column, disconnect the
transmission shift linkage from the
steering column.
4
Flaming River Industries
1-800-648-8022
081511