beautypg.com

DAVIS Emergency Radar Reflector User Manual

Assembly instructions

background image

#151

• Made from Fome-Cor

®

plastic, laminated with heavy

duty aluminum foil

• Mounts on mast, rigging, spreader, outriggers, etc.

1.

With scored line facing you, fold discs A and C
toward you to a 90° angle.

2. Holding disk B horizontal, slide disc A into

disc B through centered slot, engaging slots in
disc B.

3. Repeat on other side of disc B, using disk C.

4. Important: After assembling radar reflector,

securely lash two corners using 1/16" (1.6 mm)
synthetic line.

Unit can be disassembled and stowed flat.

ASSEMBLY INSTRUCTIONS

Optional Use of Windvane Tail

To counteract rotation, a double strand of synthetic
line 1/8 to 3/16" (3.2 to
4.8 mm) tied to a lower
corner hole forms a
windvane tail as shown.
Tail becomes more
effective as wind
increases.

INSTALLATION INSTRUCTIONS…

See next page.