beautypg.com

DAVIS Quick Fist (Regular) User Manual

Page 2

background image

For High Lift Jacks:

For best results, use three Quick Fist clamps evenly

spaced along the steel bar of the jack.

Enlarge the holes in the Quick Fist clamps using a

7/16" (12 mm) drill bit. Use a 2

1

/

2

" long (65 mm), 3/8"

(10 mm) bolt to attach the clamp, as shown below:

To mount the jack, hold it parallel to the three clamps.

Put one end of the jack into a Quick Fist clamp, with

the bolt through the steel bar, then lock the clamp

loosely. Next, place the steel bar into the other two

clamps and lock. After all three clamps are holding

the jack, tighten as necessary.

540_Engl.pdf July 2005

3465 Diablo Avenue, Hayward, CA 94545, U.S.A.

Phone (510) 732-9229 • Fax (510) 732-9188

[email protected]

www.davisnet.com

Uilenkade 12 • NL-3336 LP Zwijndrecht • The Netherlands

Phone +31 78 6194316 • Fax +31 78 6192689

[email protected] www.davisnet.com