DAVIS EchoMaster Radar Reflector - Manual (Page 16)

Replacement Parts
Echomaster replacement parts may be
obtained from your dealer or Davis
Instruments.
Echomaster 152,
Standard
#R152F
Corner Latches and Rivets (3 each)
#R155E
Radar Reflector Booklet
Echomaster Maintenance
If any reflector plates should become
bent, flatten them as well as possible in
order to obtain the high reflective per-
formance for which the Echomaster
has been designed.
The plates should be washed free of
salt water occasionally.
WARNING: No matter what method
was employed to mount the
Echomaster, it is the responsibility of
the user to make periodic inspections
of lines and fittings to insure that no
condition is developing which could
lead to mounting failure and possible
injury.
Davis Instruments wishes you many
years of happy and safe boating with
your advanced design Echomaster
Radar Reflector.
3465 Diablo Ave., Hayward, CA 94545 U.S.A.
Phone (510) 732-9229 • Fax (510) 732-9188
[email protected] www.davisnet.com
00155.010, Rev. G January 2009
© Copyright 200 9 Davis Instruments Corporation
Also Available from Davis:
Excellent as a back-up aboard larger vessels or
primary reflector on smaller boats that might not
normally carry a radar reflector. Made of plastic-
metal foil laminate. Opens in seconds and is
very lightweight. Performs almost as well as
Echomaster (see performance diagrams on
page 4). 11.5" (29 cm) in diameter. Stows flat.
Economical enough for any boat.
Recommended “best buy” by Practical Sailor.
#151