beautypg.com

Lights – Acura 2010 RL User Manual

Page 471

background image

Open the trunk lid, and remove
the left or right maintenance lid.

Remove the mounting nut with an
8 mm wrench.

Carefully pry in the top or bottom
edge of the trim with a small flat-
tip screwdriver, and pull the trim
straight back.

Remove the two mounting bolts
with an 8 mm wrench.

Pull the taillight assembly straight
back out of the body.

Remove the socket by turning it
one-quarter turn counterclockwise.

Remove the burned out bulb by
pulling it straight out of its socket.

2.

1.

3.

4.

5.

6.

7.

Lights

Replacing a Rear Turn Signal
Light Bulb

468

MOUNTING NUT

MAINTENANCE LID

TAIL LIGHT TRIM

BOLTS

BULB

SOCKET

2010 RL

This manual is related to the following products: