Acura 2010 RL User Manual
Page 166
CONTINUED
Store a driving position only when
the vehicle is parked.
Turn the ignition switch to the ON
(II) position. You cannot add a
new driving position to the
memory unless the ignition switch
is in the ON (II) position. You can
recall a memorized position with
the ignition switch in any position.
Adjust the seat to a comfortable
position (see page
).
Adjust the steering wheel to a
comfortable position (see page
Adjust the outside mirrors for best
visibility (see page
).
Your vehicle has a memory feature
for the steering wheel, driver’s seat,
and outside mirror positions.
Two seat, steering wheel, and
outside mirror positions can be
stored in separate memories. You
select a memorized position by
pushing the appropriate button.
If you do not turn the heaters off,
they will shut themselves off after 5
to 40 minutes (depending on the
ambient temperature). It also shuts
off when you turn off the ignition
switch.
You can also select the memorized
positions by unlocking the doors
with the remote. Each remote has a
driver’s ID (see page
). The
driver’s ID (Driver 1) corresponds to
the memorized positions stored with
the memory button (1). The driver’s
ID (Driver 2) corresponds to the
memorized positions stored with the
memory button (2).
1.
2.
Storing a Driving Position in
Memory
Driving Position Memory System
Mirrors, Driving Position Memory System
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
163
2010 RL