Climate control system – Acura 2010 RL User Manual
Page 212

The heater uses engine coolant to
warm the air. If the engine is cold, it
will be several minutes before you
feel warm air coming from the
system.
Select
and fresh air mode.
Set the fan to the desired speed.
Adjust the warmth of the air with
the temperature control bar.
you can
cool it down more rapidly by partially
opening the windows, turning on the
air conditioning, and setting the fan
to maximum speed in fresh air mode.
Air conditioning places an extra load
on the engine. Watch the engine
coolant temperature gauge (see page
). If it moves near the red zone,
turn off the A/C until the gauge
reading returns to normal.
The ventilation system draws in
outside air, circulates it through the
interior, then releases it through
vents near the rear window.
Set the temperature to the lower
limit.
Make sure the A/C is off.
Select
and fresh air mode.
Set the fan to the desired speed.
1.
2.
3.
4.
1.
2.
3.
If the interior is very warm,
CONTINUED
Climate Control System
Using the Heater
Using the A/C
Ventilation
Fe
a
tu
re
s
209
2010 RL