Setup, Continued – Anthem D2 User Manual

Page 39

Procedure for Manual Test Sequence:

• Enter the setup menu. Go to LEVEL CALIBRATION and press SELECT.

• Use the

buttons to set NOISE SEQUENCE to Manual.

• Press the

buttons to go from speaker to speaker.

• As each speaker plays, use the

buttons to adjust its loudness relative to other speakers.

• Press BACK to stop the test noise.

Procedure for Auto Test Sequence:

• Enter the setup menu. Go to LEVEL CALIBRATION and press SELECT.

• Use the

buttons to set NOISE SEQUENCE to Auto.

• Press SELECT to start the automatic sequence.

• As each speaker plays, use the

buttons to adjust its loudness relative to other speakers. After

you make an adjustment, the next speaker will play.

• Press BACK to stop the test noise.

3. SETUP

continued …