Yetter 6150 Series Markers - Manual (Page 15)

15
MAINTENANCE
Storing the Equipment
Store the machine in an area away from human activity
Store machine in RAISED position.
Install service locks on all wheel cylinders.
At the end of the season, the machine should be thoroughly inspected and prepared for storage.
Repair or replace any worn or damaged components to prevent down time at the start of the next
season. Store machine under cover with all parts in operating condition.
•
Clean machine thoroughly to remove all dirt, debris and crop residue, which would hold
moisture and cause rusting.
•
Inspect machine for worn or broken parts. See your Yetter Farm Equipment dealer during
the off-season so that parts or service can be acquired when machine is not needed in the
field.
•
Lubricate bearings as outlined in the Lubrication section
•
Paint all parts which are chipped or worn and require repainting.
•
Store machine in a clean, dry place with the planting unit out of the sun.
•
If the machine cannot be stored inside, cover with a waterproof tarpaulin and tie securely
in place.
• Do not allow children to play on or around the machine