Telenav for T-Mobile Supported Devices: v5.2 for J2ME; Sony-Ericsson TM506 Users Guide User Manual

Page 22

NOTE: Because the phone can only do one function at a time, it cannot make a
call and run TeleNav GPS Navigator at the same time, so the phone will
automatically exit from the TeleNav GPS Navigator application when you make a
call.

3. Follow the voice prompts to dictate an address.

4. Re-launch TeleNav GPS Navigator after speaking your directions by

clicking the icon on your phone’s menu.

5. Go to the Recent Places list and click Refresh Recent Places (select

Drive To or Maps & Traffic >> Get New Map, and then select Recent
Places). The location you entered by speaking will appear at the top of
your Recent Places list after you re-launch TeleNav GPS Navigator and
click “Refresh.”

NOTE: You must refresh the recent places in order to see the address that you
called in.

The following section contains an example of what you might hear and say when using the Speak It option for
entering an address.

TeleNav prompt> Welcome to TeleNav! Let’s get your destination. Is it a street address, an intersection, or
an airport?

Your response> Street Address

TeleNav prompt> OK, Tell me the 5 digit ZIP code, or the city and state, like Los Angeles, California. For a
Canadian address, say the city and province.

Your response> Arlington, Texas

TeleNav prompt> I heard Arlington, Texas. Say GO BACK if this is not correct. Say the street
including both the number and name, like 422 Main Street. It can also be a highway.

Your response> 1620 Oak Street

TeleNav prompt> I heard 1620 Oak Street. Say GO BACK if this is not correct. Great, your
destination has been entered: 1620 Oak Street, Arlington, Texas 75210. Would you like to enter another?

Your response> Silence (assuming that 1620 was correct)

TeleNav prompt> Thanks for calling TeleNav.

The Voice Address Input System may ask you for an account number and PIN if caller ID is not working. Simply
dictate the numbers as prompted, or key in your mobile phone number followed by pressing “#” and your TeleNav
PIN followed by pressing “#.“ If this happens, consider going to Preferences >> Call In to change to the other
dialed number.

PAGE 22 OF 58