Allied Telesis CG-WLBARGS - Manual (Page 43)

40 41
WLBARGS Manual
40 41
Admin login name User name for login this management program.
Default setting is [root].
Admin login password Default password is empty.
Password comfirmation Please retype password.
Connection Timeout Enter connection time-out time.
Time setup The default value is [Auto Setup].
Back to default setting Click [Proceed] to restore all default values.
Reboot New changes only effect after the system reboots.
Save Setting Click [Save] to save your setting values as a file.
Load Setting Click [Load] to load the files of your setting values that
you saved earlier.
Firmware update Please refer to *Firmware update.
Remote control Please refer to *Remote control.
PING testing Please refer to *PING testing.
* Firmware update
(1) Click [Browse] to open the data folder. Follow the route that the firmware
saves to select the file.
(2) After selection, click [Firmware update].
(3) When the countdown starts, do not click any button. The update will
complete soon afterward.
*Note: You may proceed [Check for updates] to look up the latest firmware from
corega's web page.