beautypg.com

Setup mode – Sper Scientific 850055 pH Meter - Advanced User Manual

Page 17

background image

17

SETUP MODE

6. Press ESC to return to P7.0 and Normal Mode.

P8.0 Reset

This procedure will reset the meter to factory default
settings. Memory locations are not reset after this
procedure.

1. Press SET for 2 seconds to enter setup.

2. Press to select the reset section of the meter.

3. “rSt” will appear on the LCD and P8.0 will appear

directly below.

4. Press MN/MX/AV to enter P8.1.

5. Press to switch between “YES” or “NO.”

6. Press MN/MX/AV to confirm.

7. Press ESC to return to Normal Mode.