Setup mode – Sper Scientific 850055 pH Meter - Advanced User Manual

Page 10

Text mode
Original mode

SETUP MODE

displays under the “TR” icon.

3. Press MN/MX/AV. The “OUT” icon flashes on the

upper display and P1.1 displays under the “OUT” icon.
This indicates that the memories are transferring. After
transmission, the LCD will return to P1.0.

Note..
The meter can store up to 99 records for each parameter.
If you want to transmit data for a different parameter, press
▲ to select your parameter before entering setup.

P2.0 Clear Memory

1. Press MODE to select the parameter you want cleared

before entering Setup Mode.

2. Press SET for 2 seconds to enter setup. Press ▲ to

select memory clear function.

3. The “CLR” icon appears on the middle display and

P2.0 illuminates in the lower display.