beautypg.com

Sper Scientific 840051 Datalogger User Manual

Page 5

background image

12

REQUIREMENTS

Windows 95 or higher, 486 cpu with 5 megs
available hard disk and 16 megs ram, 256 color
display, free RS232 port.

SOFTWARE INSTALLATION

1. Place DATA LAB software Disk 1 in the floppy

drive. From the Start menu, go to Run and
type a:/setup or from Explorer, go to A: and
double click on setup.exe.

2. Follow the on screen directions. When

prompted, insert the remaining disks.

3. When installation is complete, you will be

required to restart your computer before the
software can be properly configured.

4. To run the software, go to the “Start” menu,

“Sper Scientific, Ltd.”, “Data Lab”.




SECTION II

DATA LAB

GRAPHICAL SOFTWARE

5

FRONT PANEL DIAGRAM

Figure 1