Mc Leod Pro Series Clutch - Manual (Page 4)

Launch Adjustments
Single Spring installed in Spring Pocket:
With the clutch set at .702” with zero turns at adjusting screw = 270 lbs. One clockwise (in) turn of the
adjuster screw at each location will increase the spring pressure.
One full turn of screw = 20 lbs. 20 lbs times 6 screws = 120 + 270 @ .702” = 390 lbs. ½ turn at each
screw will equal 60 lbs…60 + 270 = 330 lbs.
Dual Springs installed in Spring Pockets:
With the clutch set at .702” with zero turns at adjusting screw = 450 lbs. One clockwise (in) turn of the
adjuster screw at each location will increase the spring pressure.
One full turn of screw = 35 lbs. 35 lbs times 6 screws = 210 + 450 @ .702” = 660 lbs. ½ turn at each
screw will equal 105 lbs…105 + 450 = 555 lbs.
Weight Adjustments
Size Description Weight Material
¼” x ½” Bolt 5.5g Steel
¼” x ¾” Bolt 6.5g Steel
¼” x 1” Shoulder Bolt 8.5g Steel
¼” x 1-1/4” Shoulder Bolt 9.5g Steel
¼” Thin Washer 1g Steel
¼” Flat Washer 2.2g Steel
¼” Jam Nut 2g Steel Figure D