Mc Leod Street Pro/Super Street Pro - Manual

Street Pro & Super Street Pro
General Installation Instructions
All McLeod street performance clutches require a Break-In period of 450 -500
miles of street stop and go type of driving before driving at wide open throttle.
This mileage is required to properly seat the disc with the pressure plate and
flywheel. The mileage listed will provide about 1200 apply and release cycles
to the clutch assembly. Do not run the vehicle on a chassis dyno prior to full
Break-In procedure.
Clutch Break-In Period
Important: During performance driving, all traction control
devices must be turned off or clutch slippage will occur!!
Street Pro #75121 Shown