Asus P4GE-V - Manual (Page 84)

4-22 Chapter 4: BIOS Setup
Onboard VGA [Auto]
When set to Auto, this item allows BIOS to automatically detect the
onboard VGA, and the AGP device if installed. Under this setting, the AGP
device has higher priority over the onboard VGA. If an AGP device is
present, the onboard VGA is disabled. If no AGP device is detected, the
onboard VGA is automatically enabled. When set to Enabled, the onboard
VGA is enabled. Any AGP device, even if present, is ignored.
Configuration options: [Auto] [Enabled]
If you set the Onboard VGA field to Enabled, the items Onboard VGA
Shared Memory, NTSC/PAL Preference, and Internal AGP Turbo Mode
appear. You may configure these items separately.
Onboard VGA Shared Memory [8 MB]
This item allows you to select the size of memory shared to the onboard
VGA. Configuration options: [1 MB] [8 MB]
NTSC/PAL Preference [NTSC]
This item allows you to select the TV output standard. Configuration
options: [NTSC] [PAL]
Internal AGP Turbo Mode [Disabled]
This item allows you to enable or disable the internal AGP turbo mode.
Configuration options: [Disabled] [Enabled]
Graphics Aperture Size [64MB]
This feature allows you to select the size of mapped memory for AGP
graphic data. Configuration options: [4MB] [8MB] [16MB] [32MB] [64MB]
[128MB] [256MB]