Innovate Motorsports XD-16 - Manual (Page 7)

- 7 -
The following items will be installed on your hard-drive
1. LM Programmer
This is used to program the XD-16
2. LogWorks
This is a comprehensive data logging and analysis package to download and analyze engine data
recorded with Innovate devices. It also allows real-time logging and display.
LogWorks allows you to program the relationship between sensor voltages recorded by the LM-1 or LMA-
3 and the indicated values. This relationship will be programmed into the XD-16 for the selected
channel/input.
3. Manuals
4. Example Log Files
5.2. Connecting the XD-16 device to the computer
1. Connect the Serial OUT connection with the included 2.5mm stereo to DB-9 cable to a serial port on your
laptop.
2. Connect the terminator plug (2.5mm male plug with no cable) into the Serial IN connection of the XD-16.
Start the LM-Programmer software. The screen should look like this:
5.3. Updating the Firmware
The LM Programmer Info/Set AFR tab reports the firmware version currently installed on your unit. Do not update
the firmware if the versions are the same. A firmware update should only be necessary if there has been a new
release.