Innovate Motorsports XD-16 - Manual (Page 11)

- 11 -
Programming the Min or Max hold function should be pretty self evident. You can enable the function. You can
also make the hold function depending on another channel. In this example the Max hold function will be
programmed so that the leanest AFR is only stored during WOT operation and only if the condition persists for
more than 0.2 seconds. In this case AFR was used as input and you don’t want to store the leanest AFR during
closed throttle where the injectors cut off. Any channel can be programmed as dependency. You can program
any minimum persist time between 0 and 10 seconds.
5.6. Programming the Warning/Alarm function
Click on the Alarm tab on the top of the screen.