Onnector for, Ighting, Ccessories – Fantasea Line FG16 Housing User Manual
Page 22: Etector, Fg16, Ousing, Ccessory, Ystem
FG16 Housing Instruction Manual 20131101
22
COLD-SHOE CONNECTOR FOR LIGHTING ACCESSORIES
The Cold-Shoe Mount featured on the housing enables mounting a flash, video light, night dive torch or
focus light on top of the housing by using a standard Cold-Shoe connector mount. For further information
regarding such connectors, lights and flashes, please visit the Fantasea website –
MOISTURE DETECTOR
An optional moisture detector device can be installed inside the housing (on the inner side of the housing
latch dial – see image #9) in order to detect moisture. Moisture detectors are very sensitive, so whenever
moisture is detected by the sensor located at the bottom of the housing, the moisture detector LED light
begins flashing and a warning alarm starts beeping, thereby alerting the user of a possible leak. Drying the
sensor off should stop this beeping. The detector battery can be replaced quite easily by carefully pulling
the detector out and peeling off the protective film which holds the battery in place. For further
instructions and Fantasea Moisture Detectors available, please visit the Fantasea website –
FG16 HOUSING ACCESSORY SYSTEM
Slave Flash
Flex Arm
SharpEye
Macro Lens
FG16 Housing
Video Light
Flex Arm
BigEye
Wide Angle Lens
EyeGrabber
Lens Holder
EyeDaptor
Lens Adaptor
Blue Ray Tray
RedEye & PinkEye
Color Correction Filters