Fantasea Line G Series EyeGrabber - Manual

1
EyeGrabber Canon G Series Instruction Manual 20110615
Fantasea EyeGrabber Canon G Series
(Cat. No. 4054)
Instruction Manual
The EyeGrabber Canon G Series allows for secure storage of Fantasea accessory lenses and filters when not installed
on the housing.
Compatible with the Following Lens Accessories:
 BigEye Lens G Series (Cat. No. 5135)
 BigEye Lens S90/S95 (Cat. No. 5139)
 EyeDaptor G Series-F67 (Cat. No. 4701) - with any lens accessory mounted on top of the adaptor
 EyeDaptor S90/S95-F67 (Cat. No. 4710) - with any lens accessory mounted on top of the adaptor
 RedEye Filter G Series (Cat. No. 5201)
 PinkEye Filter G Series (Cat. No. 5303)
 RedEye Filter S90/S95 (Cat. No. 5305)
 PinkEye Filter S90/S95 (Cat. No. 5307)
 SharpEye Lens M67 (Cat. No. 5128) - only when mounted on top of the EyeDaptor G Series-F67 (Cat. No.
4701) or the EyeDaptor S90/S95-F67 (Cat. No. 4710)
 Using the EyeDaptor G9-G10 (Cat. No. 4703) or the EyeDaptor S90/S95-G Series (Cat. No. 4707) with any of
the lens accessories mentioned above, still allows mounting these lens accessories on the EyeGrabber
 Any of the lens accessories mentioned above can still be mounted on the EyeGrabber when color correction
inserts are installed inside
 Please note that this EyeGrabber is not compatible with the RedEye Filter G7/G9 (Cat. No. 5203)
Included in the Kit:
Instructions for Use:
1. Assembling the EyeGrabber Lens Holder on a Flex or Ball & Joint Arm
a. Please use the utmost care and do not use excessive force when assembling and disassembling the different
accessories, in order to not cause any damage to the products.
b. It is advisable to mount the EyeGrabber on the arm prior to installing the arm on the housing tray or handle.
c. Remove the screws from the T2 Connector so that the two parts of the T2 Connector are disconnected. Please
note that there are two sets of screws included in the kit. The type of screws compatible with your arm
depends on the model of the arm. In general, longer screws are compatible with wider arms, such as Fantasea
T2 Connector Set of 2 shorter screws
EyeGrabber Canon G Series